CONVENTIONAL AIR CAP AND FLUID NOZZLE SELECTION CHART
| Air Cap | Air Cap Part No. | Spray Pattern Range | CFM @ 30 PSI |
CFM @ 50 PSI |
CFM @ 70 PSI |
Fluid Nozzle | Siphon or Pressure | Typical Coatings |
| 11-C | 46-6500 | 8 – 12" | 9.8 | 14.2 | 18.7 | 45-11050 series, 1.0 mm – 1.8 mm |
P | Stains, Primers, Lacquers, Enamels, Acrylics, Reduced Latex, Mold Release |
| 12-C | 46-6501 | 4 – 12" | 8.3 | 12.1 | 14.2 | 45-11050 series, 1.0 mm – 1.8 mm |
P, S | Lacquers, Enamels, Top Coats, Low Viscosity Adhesives |
| 14-C | 46-6503 | 8 – 14" | 17.0 | 24.4 | 31.2 | 45-11060 series, 2.0 mm – 2.6 mm or 45-11080 Tungsten Carbide Series (VT), 1.4 mm – 2.6 mm |
P | Zinc Rich, Adhesives, Glazes, Engobies, Ceramics, Porcelain Enamels |
